FAMILY OF STOVES »'HFAISTOS -VULCAN«

The stoves are named after the Greek god of fire and smith’s craft — Hefaistos or the same god from Roman mythology — Volcano, nevertheless, their construction and laser cutting of the steel is done by the use of the highest technology tool — the computer.

The stove is constructed on the basis of personal experiences with the existing smaller fireplaces by other manufacturers, which otherwise work excellently, but you always burn yourself trying to open them, bigger logs of wood cannot be used because you cannot put them in, furthermore, majority of them don’t have installed blowers for forced circulation of warm air on the lower part of the stove, and in addition to that, they usually don’t have a built-in oven.

Due to the use of a natural in-blowing system of the air from the upper side through special air-tubes, these Volcano stoves don’t need a grill. Firewood burns on a flat firebrick lining and for that reason the stove doesn’t have an ash holder. Primary air for combustion is regulated by four flaps in the shape of a drop located on the front side of the stove. We start the combustion by leaving the lower apertures open and when the stove gets worm we close the lower apertures and open the upper ones. Additional combustion with the supply of fresh secondary air helps to achieve cleaner smoke gases.

The temperature in the oven can be controlled by suitable quantity of appropriately thick firewood (efficient combustion can be achieved by appropriately adjusting the inlet of the air for combustion) and by a flap which baffles the burned gases across the upper part of the oven. One hour after setting the fire we can already serve deliciously baked food from the oven.

The lateral linings of the stove can either be made of colored metal or ceramic glazed tiles which can have smooth or artistically designed surface. By agreement with your contractor you can choose the motive according to your wishes. We can also attach benches to the sides of the stove and since the outlet of warm air is located in the lower part of the stove, these benches can also be heated.

In case of electricity breakdown, the stove works in a classic way with the warm air outlet on the upper part (STOVE 1 works only in classic way)

There is also a possibility of installing a boiler on the back side of the stove for heating water for a smaller radiator (which is for the sake of stove’s durability not welded into the stove but bolted inside it and can be replaced when it corrodes with years). However, for this purpose we can install a heat exchanger also on the outlet of the stove’s chimney.

Big loading doors with high temperature-proof ceramic glass provide a pleasant view of burning fire and this romantic atmosphere is enriched when the stove gives away a delicious scent of just baked food...

According to your wishes stoves can be manufactured in 4 sizes

Model	height	power	Cost incl. VAT (SIT)	Euro in/ex VAT
STOVE1	1m	9 kW	599.000	2722 / 2287
STOVE2	1,25m	14 kW	699.000	3177 / 2670
STOVE3	1,5m	18 kW	799.000	3631 / 3051
STOVE4	1,8m	28 kW	899.000	4086 / 3434

All stoves have secondary air inlet for additional combustion of not yet burnt out gases and soot.

They all have ovens, STOVE 1 — without the glass.

With the exception of STOVE 1, they all have blowers for forced warm-air circulation

installed on the lower side of the stove.

We reserve the right to minor technical changes without a warning notice.

Model of stove	STOVE 1	STOVE 2	STOVE 3	STOVE4
Chimney diameter	110 mm	140 mm	158 mm	200 mm
Stove dimens. (H,W,D)	1000 x 700 x 432	1250 x 888x 548	1500 x 960 x 610	1800 x 1250 x 772
Weight	166 kg	208 kg	250 kg	312 kg
Fire pot dimens. (H,W,D)	259 x 511 x 371	328 x 648 x 470	370 x 730 x 530	462 x 912 x 662
Fire pot surface	0,190 m^2	0,305 m^2	0,387 m^2	0,603 m^2
Fire pot aperture (H,W)	259 x 504 (ellipse)	328 x 639 (ellipse)	370 x 720 (ellipse)	462 x 900 (ellipse)
Oven dimens. (H,W,D)	147 x 336 x 252	186 x 426 x 319	210 x 480 x 360	282 x 600 x 450
Max. oven Temperature	300 ^0 C	300 ^0 C	300 ^0 C	300 ^0 C
Heating surface	50 m^2	78 m^2	100 m^2	156 m^2
Heating volume	147 m^3	236 m^3	300 m^3	467 m^3
Blower capacity	Without blowers	4 x 160 m^3/ hour	4 x 160 m^3/ hour	6 x 160 m^3/ hour
Blower consumption	0	4 x 20 W	4 x 20 W	6 x 20 W

COLOUR: Base — silver or black, resistant up to 600 ⁰ Sides - according to your wishes

GUARANTEE: 5 years

Technical information - only for STOVE3

Timber of the fur tree 700x200x200mm, weighing approximately 10kg burns continuously for more than 10 hours. For intense momentary power you have to use smaller logs of wood. Maximum combustion capacity is 5 to 6kg per hour. Stove’s efficiency is bigger at smaller consumption and vice versa. Temperature of the out-going gases is 150 0 C — 350 0 C,

the biggest efficient power is 18kW. STOVE3 is bigger and heavier than other stoves and therefore as far as heating power is concerned, STOVE3 has no competition.

Firewood consumption: kg/h (smaller logs)	1	2	3, 4	max. 5-6 kg/h
Power : _kW	3	6	.………	max, 18 kW
Efficiency : %	85 %	75%	……….	65 %
Temperature of smoke gases : _^0 C	150 ^0 C	235 ^0 C	……….	350 ^0 C
Temperature of out-blown air: _^0 C	70	80	……….	106 ^0 C

Internet orders have additional 5% discount.

Victor Motor Cars, d.o.o.

Rečna ulica 6

  Best regards                                         1000  Ljubljana

Slovenia

Manager:   Tel.: +386 1 4224 350

Bitenc Viktor                                                    GSM: +386 41 691 328

                                               Tel/Fax: +386 1 4257 815

e-mail: vmcvictor@siol.net

Back to main: click> http://www.vmcvictor.com/indexeng.html